Recalls / 2006-10-02
Scubapro® Recalls MK 20 Scuba Regulators for Service
07501 · Recalled 2006-10-02 · CPSC page
Description
The recall involves first stage regulators that are marked with the Scubapro brand and identified as the MK20.
Hazards
Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
Reported injuries
No injuries or underwater incidents have been reported. Scubapro® USA has received eight reports of units that failed after being serviced.
Remedy
Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.
Products
| Name | Model | Units |
|---|---|---|
| Scubapro® MK 20 First Stage Regulators | About 48,500 units |
Parties
- Manufacturer
- Scubapro® USA
- Made in
- Italy, United States
- Sold at
- Authorized Scubapro® dealers nationwide
Consumer contact
For assistance in locating the nearest authorized Scubapro® dealer or for more information, contact Scubapro® USA toll-free at (800) 731-6685 between 8 a.m. and 5 p.m. PT Monday through Friday, or go to the firm's Web site at www.scubapro-uwatec.com
Source: CPSC recall 07501. Inclusion in this database is not legal or medical advice.